|
Features:
- The EQ2231 is a two channel graphic equalizer that provides a generous +/-15dB of control range on each of 30 constant Q frequency bands.
- Centre bypass. When any eq fader is in its centre detent position,the filter is automatically bypassed, for optimum performance.
- Sweepable high pass filter, frequency adjustable from OUT (flat) up to 250Hz.
- LF Contour Smooth shelving filter, +/-6dB of gain at 50Hz. >> HF Contour Smooth shelving filter, +/-6dB of gain at 14 kHz.
- GAIN Used for overall unity gain adjustment. Adjustable from - infinity to +10dB.
- Triple-point clip detector that indicates red when the internal signal is clipping at any one of EQ filter,HF/LF contour and Gain.
- Precise LED indication. When EQ switch is off, the LED indicates the input signal level. When EQ switch is on, the LED indicates output signal level.
- Relay bypass. When switched out, or power fails, a high-quality relay switches the input signal directly to the output connectors.
- The high-quality relay drive incorporates a power on delay and AC power loss, ensuring that there is no possibility of on/off thumps being generated by the unit.
- The standard 3U structure, To make installation easier, we've provided different interface connectors.
Front Panel:
Rear Panel:
| Specifications |
Input impedance
|
10kΩ balances or unbalanced |
| Overload voltage |
8.5V |
Frequency response
|
5Hz-45Hz +/- 1db |
| Distortion |
<0.008% THD 20-20kHz 0 dBu |
| Max output voltage |
9.5V |
| Input impedance |
<50Ω balances or unbalanced |
| S/N Rate |
>92dB |
| Dynamic range |
>115dB |
| Cross talk |
>85dB@1kHz |
| Voltage gain |
>10dB |
| Frequency point control |
+/-15dB on ISO centres and the Q is 4 |
| Others |
| AC Power |
~115V/~230V 50Hz/60Hz 30VA |
| Dimention |
482 x 160x 90mm |
| N.W |
2.5kg |
| G.W |
4.0kg |
| Accessories |
| Power cable |
1 Pcs |
| Manual |
1 Pcs |
|
|
