|
Features:
- The AP-4U and the AM4-U 4 cannel modular system amplifiers are the most flexible solutions for any mobile and permanent installation application
- The module slots on the front panel of AP-4U or AM-4U allow insertion of analogue or digital controller cards.
- Therefore it is feasible to integrate the signal processing. Normally this is realized through external equipment. The advantage of handling things in this way is quite obvious.
- Using the control modules provides the opportunity to set up very compact sound reinforcement systems, individually matching a particular application.
- Cable length and connections are reduced to the minimal amount.
- For example AP4-U can be attached to up to eight T18W, which forms a bass fundament for the TLA-101 Line Array or the Onax PA-Systems.
- The mechanic construction and manufacturing guarantees highest sound precision. The robust and highly rigid steel chassis is meant to survive the extensive wear of touring applications.
| Specifications |
| Power |
4 channel mode |
8Ω |
4×1200W/peak 4×3000W |
| Power |
4 channel mode |
4Ω |
4×1800W/peak 4×5000W |
| THD |
<0,1% 20Hz-20KHz |
| Intermodulation distortion |
<0,5% (f = 60Hz/7Khz, 4:1 )
on normal working condition |
Frequency response
|
20Hz - 20KHz (±0,25dB ) |
| Phase deviation |
<15° |
| Damping factor |
> 600 20Hz-400Hz |
| Crosstalk |
-75dB |
| Signal to noise ratio |
>105dB |
| Total gain |
40±0.5dB |
| Error of channel gain |
<0,25dB |
| Input sensitivity |
1V |
| Slew rate |
>100Vμs |
| Input impedance |
Unbalanced:10KΩ; Balanced:20KΩ |
| Input connectors |
8pcs,3-pin XLR Neutrik |
| Output connectors |
4pcs,Speakon NL4 MP |
| Cooling |
two fans, brushless,stageless shifting |
| Controls on front panel |
Power on/off ; 4 x mute; |
| Controls on back panel |
Fuse |
| Indicator on front panel |
4 x mute light |
| Amplifier protection |
DC , overload & overheat protection etc. |
| Dimensions (W×D×H) |
483×452×178mm |
Power supply
|
AC 220V 230V, 50Hz 60Hz, 1500VA |
| Weight |
40kg |
|
|
